NETGEAR DG834G
What's in the box?
- NETGEAR DG834 - 4 port Ethernet router with built in ADSL modem
- Ethernet cable
- RJ11 cable
- Power adapter
- Micro filter
- Set up guide and other documentation
How to set it up
Ensure you have all the equipment and nothing is missing.
Connect one end of the Ethernet cable to the port on the back of the router and the other end into the corresponding port on your PC.
Take the RJ11 cable and plug it into the port on the back of the router and the other end into the DSL port on the micro filter.
Plug the micro filter into the telephone socket and finally plug the power adapter into the router and a suitable power supply.
You should see the lights on the front of the modem come on.
Next you you will need to open your browser e.g. Internet Explorer/Firefox, type in http://192.168.0.1 into the address bar and hit Enter. You should now see this page:
Enter admin in the User Name field and password in the Password field then click OK.
In the menu the left side of the window click on Basic Settings, work through the page entering the following settings:
- Does your connection require a login?: Yes
- Encapsulation: PPPoA (PPP over ATM)
- Login: As provided to you by IDNet
- Password: As provided to you by IDNet
- Idle Timeout: 0
- Internet IP address: Get Dynamically from ISP
- Domain Name Server (DNS) address: Primary 212.69.36.3 Secondary 212.69.40.3
- NAT (Network Address Translation): Enable
Click Apply then go to ADSL Settings.
Enter the following settings:
- Multiplexing Method: VC-Based
- VPI:0
- VCI:38
- Click Apply
You have now entered all the information you need to make a connection to the Internet. You may need to configure your PC, to do this go to Control Panel and click on Network Connections.
Then right click on the Local Area Connection icon and click on Properties.
You will now see this page:
Right click on Internet Protocol (TCP/IP) and click on Properties and you should see the following window:
Ensure that Obtain an IP address Automatically and Obtain DNS server address automatically are selected then click OK.
If you want to use the wireless functionality of the router you should now go to Wireless Settings to set this up. Go back to the Netgear configuration page and click on Wireless Settings found in the left hand menu.
Enter the following settings:
- Name (SSID): NETGEAR
- Region: Europe
- Channel: leave as default, this can be changed at a later if necessary.
- Mode: g&:b
- Wireless Access Point: Enable Wireless Access Point, Allow Broadcast of Name (SSID)
- Security Options: Which security option you choose to use is up to you and the compatibility of your wireless adapter however we recommend WPA- PSK
- WPA- PSK Security Encryption: Enter a password to be used as your encryption key, this should be a minimum of 8 characters and can be alpha numeric. Make a note of the pass key as you will need this later.
- Click Apply
Locate the wireless adapter client in your PC/laptop and scan for available networks, NETGEAR should be listed, click to connect to this network and you should be prompted for the pass key. Once entered you be able to access the Internet, if you have any difficulty why not visit our Support Guides for assistance with troubleshooting the issue, alternatively contact the Support Team.
Information on how to set up email accounts can be found on the Email Set Up section of the Support Guides.